Air Quality
This page provides insights into the data from the Air Quality Sensor, measured in mg/m3 unit. The charts are based on data representing the average air quality per day for each resource.
1. Overall Air Quality mg/m3 Gauge Chart
Description
The gauge chart displays the overall average air quality, based on the selected filter. It provides insights at the building level or floor level but does not show resource-level average air quality.
Use Case
Ensures employees work in a safe environment.
Helps adjust air systems for better indoor air quality.
Tracks air quality to meet environmental standards.
2. Overall Air Quality KPI Card
Description
The KPI chart displays the overall average air quality, based on the selected time frame. It provides insights at the building level or floor level but does not show resource-level daily average air quality.
Note: For resource-level average air quality, refer to the separate KPI cards below.
Use Case
Identifies trends in declining air quality, prompting necessary maintenance actions.
Tracks air quality to meet environmental standards.
3. Air Quality by Resource
Description
The chart displays the average air quality for each resource, with reference lines indicating air quality status thresholds.
Use Case
Adjust ventilation based on room-specific air quality.
Detect spaces with consistently poor air quality.
4. Average Air Quality KPI cards for Resource
Description
The KPI cards display the values and trends of the daily, weekly, and monthly average air quality over the selected time range. The up and down arrows indicate comparisons between time periods based on the KPI chart. Additionally, a gauge chart displays the overall average air quality of a resource. All these charts are filtered by the selected resource.
Use Case
Identify resources where air quality is consistently low.
Monitor workplace air quality for better health conditions.
Adjust airflow and ventilation based on trends.
5. Air Quality by Day for Resource
Description
The chart displays the air quality by weekday for the selected resource.
Use Case
Identify if air quality is consistently worse on specific days.
Adjust ventilation schedules based on air quality patterns.
6. Air Quality Trend for Resource
Description
The chart displays the air quality trend for the selected time frame and resource.
Use Case
Identify periods of low air quality and take preventive actions.
Adjust ventilation or air purification systems based on trends.
7. Summary Table
Description
The summary table displays the raw data for air quality sensor within the selected time range. This data is used to create the above charts. Users can download the data as a CSV file or create their own charts from the summary table.
Use Case
Investigate fluctuations in average daily air quality.
Allows users to export data for further analysis or reporting.
Last updated
Was this helpful?