Temperature Log
This page provides insights into the data from the Temperature sensor, measured in celsius. The charts are based on data representing the average temperature level per day for each resource.
Last updated
Was this helpful?
This page provides insights into the data from the Temperature sensor, measured in celsius. The charts are based on data representing the average temperature level per day for each resource.
Last updated
Was this helpful?
The gauge chart displays the overall average temperature level, based on the selected filter. It provides insights at the building level or floor level but does not show resource-level average temperature level.
Helps monitor overall temperature level.
The KPI chart displays the overall average temperature level, based on the selected time frame. It provides insights at the building level or floor level but does not show resource-level daily average temperature level.
Note: For resource-level average temperature level, refer to the separate KPI cards below.
Detect overcooling or overheating trends.
The Temperature Level by Resource chart provides an overview of the average temperature concentration for each resource. It includes reference lines indicating predefined temperature status thresholds.
Ensure optimal temperature for specific resources.
Identify underutilized or inefficient heating/cooling resources.
The KPI cards display the values and trends of the daily, weekly, and monthly average temperature over the selected time range. The up and down arrows indicate comparisons between time periods based on the KPI chart. Additionally, a gauge chart displays the overall average temperature of a resource. All these charts are filtered by the selected resource.
Track temperature trends to ensure optimal working conditions.
The chart displays the temperature level by weekday for the selected resource.
Ensure consistent temperature levels throughout the week.
Spot anomalies where temperature drops or spikes unexpectedly.
The chart displays the temperature level trend for the selected time frame and resource.
Compare temperature trends over different periods to track improvements.
The summary table displays the raw data for temperature sensor within the selected time range. This data is used to create the above charts. Users can download the data as a CSV file or create their own charts from the summary table.
Investigate fluctuations in average daily temperature level.
Allows users to export data for further analysis or reporting.
